Adafruit Electronics 100% 3D-Printed Bench Vise – No Hardware Required, 100mm Clamping Range #3DThursday #3DPrinting
STLsupplier shares: A compact, fully 3D-printed bench vise — 160×160×80mm with a 100mm clamping range.
Executive Summary
STLsupplier shares: A compact, fully 3D-printed bench vise — 160×160×80mm with a 100mm clamping range. For light-to-medium clamping: hobby work, gluing, soldering, assembly, holding small prints during cleanup. No screws, bolts, or rods needed. The spindle hole needs supports; after printing, file the rough area smooth for proper operation. Rotates maker tools back into the lineup — practical and screwless.
Open Silicon & Gate-Level Hardware Inspection
From a silicon and hardware engineering viewpoint: - **Interface Neutrality:** Mitigates dependency on proprietary BSPs, empowering open toolchains to address hardware directly. - **Supply Chain Verification:** Schematics and open pinouts allow deterministic audits against silicon errata. - **Lifecycle Decoupling:** Decouples physical hardware utility from commercial vendor end-of-life obsolescence.
Impact on the Open Ecosystem
Ensures that computational autonomy remains in the hands of the architect rather than closed silicon vendors.