# floppy3.5 open-hardware project enables WiFi NAS access for 3.5-inch floppy disks

> **Key takeaway:** A new portable, battery-powered device uses an RP2354A and ESP32-S3 to serve files from legacy 3.5-inch floppy disks via a web interface.

**Published:** 2026-11-17T15:26:19+00:00 
**Source:** Adafruit Electronics 
**Category:** open-hardware 
**Canonical URL:** https://fosswire.org/news/floppy35-open-hardware-project-enables-wifi-nas-access-for-3.html 

## Summary
The floppy3.5 project, developed by bigcrimping, is a portable WiFi-enabled Network Attached Storage (NAS) device designed to interface with legacy 3.5-inch floppy disks. It specifically targets media stored on disks from older digital cameras, such as the Sony Mavica series. The device allows users to view FAT12 disk contents via a web page and transfer files to a microSD card.

The hardware utilizes a custom PCB featuring two primary processors to manage disk decoding and network services. All project files, including the firmware, PCB designs, and 3D-printable housing, are released under the Unlicense. This ensures the project remains fully open-source and available for community modification and reproduction.

## Technical architecture and firmware implementation
- **Dual-Processor Design:** The system employs an RP2354A controller to handle disk operations and an ESP32-S3 to act as a bridge, driving the controller via a custom SPI link and serving the web interface.
- **Firmware Porting:** The RP2354A runs a port of Keir Fraser’s Greaseweazle firmware, featuring a reworked flux engine that utilizes the RP2354’s PIO (Programmable I/O) and DMA instead of the STM32 timers used in the original implementation.
- **Data Integrity and Storage:** Files are transferred to a microSD card using SHA-256 checksums to prevent duplicate copies, and the system manages camera-specific file numbering by creating unique folders for each disk.
- **User Interface and Connectivity:** A segment-style LCD provides a visual track map of the 80 cylinders, while both the RP2354A and ESP32-S3 firmware can be updated wirelessly over WiFi.

## Why it matters
This project provides a practical application for the RP2354A's PIO capabilities in specialized embedded tasks like floppy disk flux decoding. It also serves as a reference for developers interested in combining legacy media interfaces with modern WiFi-based storage solutions using open-source hardware.