# Linked Lamp open-hardware pair uses ESP32, MQTT, and browser-based firmware flashing

> **Key takeaway:** A WiFi-connected touch lamp project ships fully open hardware with browser-based ESP32 firmware deployment, eliminating the need for a local toolchain.

**Published:** 2026-11-18T18:06:24+00:00 
**Source:** Adafruit Electronics 
**Category:** open-hardware 
**Canonical URL:** https://fosswire.org/news/linked-lamp-open-hardware-pair-uses-esp32-mqtt-and-browser-b.html 

## Summary
Linked Lamp is an open-hardware project that creates pairs of touch-responsive lamps communicating over arbitrary MQTT brokers. Each unit is built around an ESP32 microcontroller with a touch sensor and WS2812B NeoPixel LEDs, either on a custom PCB or a standard LED ring inside a 3D-printed enclosure. The project provides free 3D files, PCB schematics, and firmware, with a notable deployment method: firmware is flashed directly from Chrome or Edge through a browser-based setup wizard, removing the traditional ESP-IDF or Arduino toolchain requirement.

The lamps transmit color states between paired devices regardless of network location, mediated by a user-configurable MQTT broker. A web dashboard controls color selection, hold and transition timing, preset storage, and animated multi-color sequences. The firmware implements NTP-synchronized timezone awareness for automatic sleep scheduling, with night-mode tap responses that either dim or suppress illumination, and a configurable 10% brightness idle glow during inactive daytime hours.

## Hardware architecture and firmware delivery
- **MCU platform:** ESP32 handles WiFi connectivity, touch sensing, LED control, and MQTT messaging, with no additional gateway or cloud service required.
- **Connectivity model:** Messages route through a builder-selected MQTT broker, decoupling the two lamps from shared local network infrastructure.
- **Open artifacts:** 3D enclosure files, PCB schematics, and firmware source are all freely available, satisfying full open-hardware distribution.
- **Deployment mechanism:** Browser-based flashing via Chrome or Edge replaces conventional toolchain setup, lowering the barrier for builders without embedded development environments.
- **Power management features:** NTP-driven sleep scheduling with timezone awareness, configurable night-mode response behavior, and a 10% idle glow state for daytime inactivity.

## Why it matters
The browser-based firmware flashing approach addresses a persistent friction point in ESP32 projects, potentially influencing how other open-hardware designs distribute software to non-technical builders. By combining complete schematic and mechanical openness with MQTT-based decentralization rather than proprietary cloud pairing, the project offers a reference model for privacy-respecting connected devices that remains fully user-controllable.