# Seeed Studio and OpenDisplay launch open-source ePaper Home Assistant kits with multi-year battery life

> **Key takeaway:** Two fully-assembled, open-source ePaper display kits powered by nRF52840 offer wireless Home Assistant integration via Bluetooth Low Energy with estimated battery life of 1-2 years.

**Published:** 2026-11-03T01:38:05+00:00 
**Source:** Seeed Studio Blog 
**Category:** open-hardware 
**Canonical URL:** https://fosswire.org/news/seeed-studio-and-opendisplay-launch-open-source-epaper-home-.html 

## Summary
Seeed Studio has partnered with the OpenDisplay project to release two ready-to-use ePaper display kits: a 4.26-inch monochrome model and a 7.3-inch six-color model. Both are built around Seeed's XIAO nRF52840-based driver boards (EN04 for the color kit, EN05 for the mono kit), include 2000 mAh rechargeable batteries and 3D-printed enclosures, and ship with pre-installed OpenDisplay firmware.

The kits communicate with Home Assistant via Bluetooth Low Energy rather than Wi-Fi, enabling on-demand screen updates without scheduled wake-ups. The monochrome kit supports partial refresh for faster updates of frequently changing data and is rated for up to two years of battery life with 15-minute update intervals. The color kit, using Spectra 6 display technology, targets longer intervals with an estimated one-year battery life. OpenDisplay also provides browser-based tools and a Python SDK for non-Home Assistant use cases.

## Hardware architecture and open-source stack
- **MCU platform:** Both kits use the Nordic nRF52840 SoC on Seeed XIAO EN04 (color) or EN05 (mono) driver boards, providing Bluetooth 5 Low Energy connectivity with ultra-low power consumption.
- **Display specifications:** The 4.26″ mono kit offers 800 × 480 resolution with black-and-white and optional 4-level grayscale modes, plus partial refresh capability; the 7.3″ color kit uses Spectra 6 technology with six colors (black, white, red, yellow, blue, green) at the same resolution.
- **Power and battery:** Each kit includes a 2000 mAh rechargeable battery, with estimated lifetimes of 2 years (mono, 15-minute updates) and 1 year (color, 2-hour updates) due to BLE-based on-demand updates eliminating scheduled wake-ups.
- **Software stack:** OpenDisplay provides open-source firmware, an open communication protocol, native Home Assistant integration via BLE, browser-based image upload tools, and a Python SDK for custom applications.
- **Physical design:** Kits ship fully assembled with 3D-printed enclosures; the project originated from the OpenEPaperLink community and emphasizes local, open, low-power operation without cloud dependencies.

## Why it matters
These kits lower the barrier to deploying open-source smart home displays by combining fully-assembled hardware with genuinely open firmware and protocols, contrasting with proprietary ePaper alternatives. For the Home Assistant and broader home automation community, the multi-year battery life and BLE-based local communication eliminate the infrastructure and maintenance burden of Wi-Fi-connected displays, while the Python SDK and browser tools support custom development outside the Home Assistant ecosystem.