Open Hardware & RISC-V

ESP32-C5 SDR project detects and categorizes WiFi band interference

Key Takeaway

An open-source ESP32-C5-based software-defined radio system can classify four distinct types of WiFi interference and integrate with Home Assistant for monitoring.

Summary

Hardware developer [TheDigital1] has released an open-source WiFi interference detector built on the ESPARGOS ESP-SDR framework and the ESP32-C5 microcontroller. The device scans both 2.4GHz and 5GHz bands using software-defined radio techniques, classifying detected interference into four categories: wideband, narrowband, pulsed wideband, and frequency-swept signals. The project runs on a Waveshare ESP32-C5-Touch-LCD-3.5 but is designed to be portable to other ESP32-C5 hardware.

The system functions as a standalone portable device with a touchscreen interface, and gains additional capabilities when connected to a PC via USB. Beyond interference detection, the hardware can sense room occupancy by monitoring noise floor increases caused by human movement. The project integrates with Home Assistant for automated WiFi jammer detection, though the developer notes that the system identifies interference patterns rather than determining intent behind the signals.

SDR architecture and detection capabilities

  • ESP32-C5 dual-band SDR: The hardware leverages the ESP32-C5's 2.4GHz and 5GHz radio capabilities through the ESPARGOS ESP-SDR software-defined radio project, enabling spectrum analysis across both WiFi bands without separate RF frontends.
  • Four-class interference taxonomy: The detection algorithm categorizes signals as wideband, narrowband, pulsed wideband, or frequency-swept, providing diagnostic granularity beyond simple noise threshold alerting.
  • ESPARGOS framework foundation: The project extends the existing ESPARGOS open-source SDR platform for ESP32, demonstrating continued community evolution of low-cost SDR tooling.
  • USB host mode expansion: PC connectivity unlocks additional features beyond the standalone touchscreen interface, suggesting the firmware exposes data streams or control APIs for host-side processing.
  • Passive occupancy sensing: The noise floor analysis capability for detecting human presence repurposes WiFi SDR hardware for environmental sensing without dedicated motion sensors.

Why it matters

This project advances the accessibility of professional-grade RF analysis tools by packaging spectrum monitoring into sub-$30 ESP32 hardware with open-source firmware. For network administrators and open-hardware builders, the Home Assistant integration provides a path to automated WiFi quality monitoring without proprietary spectrum analyzer investments, while the ESPARGOS framework continues to mature as a community-driven alternative to commercial IoT SDR platforms.

Original reference: hackaday.com →