Linked Lamp open-hardware pair uses ESP32, MQTT, and browser-based firmware flashing
A WiFi-connected touch lamp project ships fully open hardware with browser-based ESP32 firmware deployment, eliminating the need for a local toolchain.
Summary
Linked Lamp is an open-hardware project that creates pairs of touch-responsive lamps communicating over arbitrary MQTT brokers. Each unit is built around an ESP32 microcontroller with a touch sensor and WS2812B NeoPixel LEDs, either on a custom PCB or a standard LED ring inside a 3D-printed enclosure. The project provides free 3D files, PCB schematics, and firmware, with a notable deployment method: firmware is flashed directly from Chrome or Edge through a browser-based setup wizard, removing the traditional ESP-IDF or Arduino toolchain requirement.
The lamps transmit color states between paired devices regardless of network location, mediated by a user-configurable MQTT broker. A web dashboard controls color selection, hold and transition timing, preset storage, and animated multi-color sequences. The firmware implements NTP-synchronized timezone awareness for automatic sleep scheduling, with night-mode tap responses that either dim or suppress illumination, and a configurable 10% brightness idle glow during inactive daytime hours.
Hardware architecture and firmware delivery
- MCU platform: ESP32 handles WiFi connectivity, touch sensing, LED control, and MQTT messaging, with no additional gateway or cloud service required.
- Connectivity model: Messages route through a builder-selected MQTT broker, decoupling the two lamps from shared local network infrastructure.
- Open artifacts: 3D enclosure files, PCB schematics, and firmware source are all freely available, satisfying full open-hardware distribution.
- Deployment mechanism: Browser-based flashing via Chrome or Edge replaces conventional toolchain setup, lowering the barrier for builders without embedded development environments.
- Power management features: NTP-driven sleep scheduling with timezone awareness, configurable night-mode response behavior, and a 10% idle glow state for daytime inactivity.
Why it matters
The browser-based firmware flashing approach addresses a persistent friction point in ESP32 projects, potentially influencing how other open-hardware designs distribute software to non-technical builders. By combining complete schematic and mechanical openness with MQTT-based decentralization rather than proprietary cloud pairing, the project offers a reference model for privacy-respecting connected devices that remains fully user-controllable.
Original reference: blog.adafruit.com →