Open Hardware & RISC-V

Motorboat racer uses Arduino Nano and UNO for custom racing electronics

Key Takeaway

F125 world champion Luca Finotti utilizes Arduino microcontrollers to build custom air density meters and in-race carburetion variators.

Summary

Luca Finotti, a professional motorboat racer and industrial automation student, has successfully integrated custom-built Arduino electronics into competitive F125 racing. By leveraging open-source hardware, Finotti developed specialized tools to overcome the limitations of standard off-the-shelf racing instrumentation.

His technical implementations include an air density meter for precise carburetion setup and a motorized carburetion variator. The latter uses a stepper motor and display to allow real-time engine adjustments while the boat is in motion, a capability not typically permitted by standard racing regulations in his category.

Technical implementation and hardware usage

  • Microcontroller selection: Finotti utilizes the Arduino Nano for compact, low-I/O applications where weight and space are critical, and the Arduino UNO for initial bench development.
  • Actuation and Interface: The in-race carburetion variator employs a stepper motor driven by the microcontroller to physically adjust engine settings, controlled via buttons and a visual display.
  • Environmental hardening: To combat high vibration and humidity, custom enclosures are produced using CAD modeling and resin 3D printing, incorporating dedicated vibration dampers.
  • Future development: Ongoing projects include a hybrid PLC and Arduino test bench for engine data simulation and a custom Electronic Control Unit (ECU) to transition from carburetors to fuel injection.

Why it matters

This use case demonstrates the viability of low-cost, hobbyist-grade microcontrollers in high-performance, high-vibration industrial and sporting environments. It highlights how open-source hardware prototyping can bridge the gap between professional engineering and specialized niche applications.

Original reference: blog.arduino.cc →