Open Hardware & RISC-V

Nabu Casa launches Home Assistant Connect AUX-2 smart home hub with PoE and audio streaming

Key Takeaway

The ESP32-S3-based AUX-2 hub provides expanded connectivity for audio, serial control, and Bluetooth proxying via Ethernet or Wi-Fi.

Summary

Nabu Casa has released the Home Assistant Connect AUX-2, a specialized hardware expansion designed to augment existing Home Assistant installations. Built on the Espressif ESP32-S3R8 microcontroller, the device serves as a bridge for audio equipment, serial-controlled devices, and Bluetooth peripherals.

The hub supports Power over Ethernet (PoE) via the IEEE 802.3af standard, allowing for single-cable data and power delivery. It also features an unlocked bootloader, enabling users to install custom firmware beyond the standard ESPHome-based software provided by Nabu Casa.

Hardware specifications and connectivity

  • Core Processing: Powered by an ESP32-S3R8 MCU featuring 8MB of PSRAM and 8MB of flash storage.
  • Audio Subsystem: Utilizes a Texas Instruments PCM5122 DAC with a 112dB signal-to-noise ratio, supporting 16-bit/48kHz stereo via 3.5mm analog or optical S/PDIF outputs.
  • Networking and Power: Includes a W5500 Ethernet controller for wired connections and supports IEEE 802.3af PoE; wireless options include 2.4GHz Wi-Fi and Bluetooth 5 LE with proxy support for up to three connections.
  • I/O Expansion: Features two configurable 3.5mm RS-232 serial ports, a USB-A port for Z-Wave or RS-485 adapters, and a Grove connector for I²C and GPIO sensor expansion.

Why it matters

By providing an unlocked bootloader and ESPHome-based firmware, the AUX-2 supports the open-source ethos of user customization. It allows smart home enthusiasts to extend the reach of their Home Assistant instance to remote locations using PoE and provides a standardized way to integrate legacy serial and Hi-Fi audio equipment into a modern network.

Original reference: linuxgizmos.com →