Open Hardware & RISC-V

Tinta open-source ePaper signs run year-plus on alkaline batteries via MOSFET power switching

Key Takeaway

Wake Electronics' Tinta ePaper signs achieve over one year of battery life by using MOSFET-based hardware power switching rather than sleep modes, with fully open-source firmware and hardware designs.

Summary

Wake Electronics has launched a Crowd Supply campaign for Tinta, an open-source ePaper display system designed for room reservations, home automation dashboards, and sensor visualization. The device comes in two sizes—a 4.2-inch 400×300 model powered by three AAA batteries and a 7.5-inch 800×480 model powered by three AA batteries—and uses a Raspberry Pi Pico W with RP2040 microcontroller and 2.4GHz Wi-Fi.

Rather than employing conventional microcontroller sleep modes, Tinta uses MOSFET-based power switching to completely shut down the processor and supporting circuitry between display updates. A real-time clock or physical button triggers wake-up cycles, with NFC activation available on the smaller model. The device retrieves data over Wi-Fi, refreshes the ePaper panel—which retains its image without power—and then powers down entirely. This architecture enables approximately 6,000 update cycles for the 4.2-inch model and 10,000 for the 7.5-inch model, translating to more than a year of operation under typical refresh schedules.

Hardware architecture and power design

  • RP2040/Pico W platform: The current design uses the Raspberry Pi Pico W with dual-core RP2040 microcontroller; the developer is evaluating migration to the Raspberry Pi Pico 2 W with RP2350, though the final processor choice remains undecided.
  • MOSFET power switching: Instead of software sleep modes, the design employs hardware-controlled MOSFET switches to cut power to the processor and peripheral circuitry entirely between update cycles, eliminating idle power draw.
  • Wake-up triggers: The system supports multiple wake sources including a real-time clock for scheduled updates, physical buttons for manual refresh, and NFC touch activation on the 4.2-inch model.
  • Dual-slot OTA bootloader: Firmware updates are delivered over-the-air using a custom dual-slot bootloader, enabling reliable field updates without physical access.
  • Open-source licensing: Firmware is published under Apache License 2.0, with KiCad PCB designs and FreeCAD enclosure models released under CERN-OHL-S-2.0.

Why it matters

Tinta demonstrates a practical application of fully open-source hardware and firmware for commercial IoT signage, with direct integration to self-hosted platforms like Seatsurfing, CCU-Historian, and Homematic without proprietary cloud dependencies. The project's use of standard Raspberry Pi Pico tooling, KiCad, and FreeCAD lowers barriers for community modification and forked designs, while its extreme power efficiency through hardware switching rather than sleep modes offers a reference design for other battery-operated embedded Linux and microcontroller projects.

Original reference: linuxgizmos.com →