Open Hardware & RISC-V

Weeb Labs DSPi panel firmware 1.5.0 adds SMB shares, BLE remote, WiFi updates

Key Takeaway

The ESP32-S3-based open-source front panel now streams from network shares and updates itself over WiFi while preserving all user configuration.

Summary

Weeb Labs has published version 1.5.0 of its DSPi front panel firmware, an open-source control interface built around the ESP32-S3 that manages a companion DSPi digital signal processor. The panel functions as both music source and control surface, feeding 24-bit S/PDIF audio at 44.1 or 48 kHz over a direct 3.3 V GPIO logic-level link to the DSPi's Raspberry Pi Pico input. Music playback sources now include microSD local storage and up to four SMB network shares, with folder browsing, album artwork display, track seeking, and automatic advance.

The interface layer provides preset management, an analog VU meter, stereo spectrum visualization, and editors for EQ and crossover settings. Two volume controls operate independently: User Volume sets listening level with loudness compensation, while Master Volume applies global attenuation without altering the compensation curve. Bluetooth Low Energy remote control is supported with pairings preserved across updates. Initial installation requires a full USB flash image, but subsequent firmware updates are delivered through a local WiFi web interface that retains BLE pairings, remote mappings, presets, and display settings. That same interface handles music file transfers at approximately 0.45 to 0.60 MB/s.

Firmware architecture and audio path

  • ESP32-S3 core: The panel runs on Espressif's ESP32-S3 SoC, which provides the WiFi, BLE, and GPIO resources for display, networking, and the S/PDIF output stage.
  • S/PDIF implementation: Audio is transmitted as 24-bit S/PDIF at 44.1 kHz or 48 kHz over a single 3.3 V GPIO logic-level wire connected directly to GPIO5 on the DSPi's Raspberry Pi Pico, requiring short physical runs rather than standard coaxial or optical interconnects.
  • Network storage: The firmware mounts up to four SMB/CIFS network shares for remote music libraries, supplementing the local microSD slot for playback sources.
  • Dual volume control: User Volume applies loudness-compensated level setting, while Master Volume provides a separate global attenuation path that does not modify the loudness compensation parameters.
  • Update mechanism: Post-installation firmware updates are served from a captive WiFi web page hosted by the panel itself, with persistent storage of BLE pairings, remote button mappings, presets, and screen calibration data across update cycles.

Why it matters

This release demonstrates a mature open-source embedded audio stack that other DIY DSP and amplifier projects can adapt, particularly the SMB network streaming and self-hosted WiFi update patterns. The ESP32-S3 platform choice keeps the hardware accessible and affordable for hobbyist builders, while the published firmware provides a reference for S/PDIF generation and loudness compensation on resource-constrained MCUs. For the broader open hardware audio community, the separation of User and Master Volume controls reflects professional audio engineering practice rarely seen at this price tier.

Original reference: blog.adafruit.com →